Manure Spreaders Muck Master M2070 / M2470 Series
The Muck Master M2070 (ex M20) is fitted with two robust road axles 130mm and oversized brakes 406x120mm. With an accurate heaped capacity of 20m3, this model meets the needs of users with high volume requirements and can reach a spreading width from 8 to over 15 meters, depending on the product to be spread. The M2470 (ex M24) model, with a heaped capacity of 24m3, is fitted with a tandem axle (150mm square beam) and oversized brakes 420x180mm.
These muck spreaders are equipped with a fully galvanised straight body which can be dismantled. In order to get a quality spreading pattern, PICHON chose to put together two vertical beaters with oversized diameter (1035mm) and 52 reversible blades which are driven by a single “monobloc” gearbox.
The specific position of the beaters frame prevents the product to be spread from being pushed back inside the body thereby reducing power required on PTO. This unique PICHON design is clearly a genuine innovation. By combining this design with the oversized beaters, PICHON enables its users to spread all kind of products with accurate spread pattern and high volume outputs.
Standard specs on these M2070 and M2470 spreaders are: front protection with inside view, galvanised sprung drawbar and adjustable hydraulic jack. The floor made of 70mm U-shaped slats can be fitted with Marine chains 16mm diameter or Vaucanson chains 20mm diameter. The floor is driven by an oversized gearbox with a 10.000Nm torque and controlled by an in-cab electric box.
The 2 tandems axles can be approved 40 KM-H depending on the diameter of wheels. The active hydraulic suspension DELTA is available as an option on the M2470 model.
With this versatile muck spreader, PICHON enables its users to spread both thick and lighter products without having to use several machines.
Many options are available in order to meet the specific needs of each user. Please refer to the section “Possible equipments” to get the full list of options and you can also find more pictures in the page “options ”.
In pictures
Product details
• 5 years warranty: body/frame and chassis (Europe market)
• Accurate capacity of the range of solid spreaders
• Galvanisation on all the series
STRUCTURE:
• fully galvanised
• axle recessed in the chassis
• chassis 6mm thick
• removable body sides board 4mm thick
• front frame 4 and 6mm thick
• stainless steel bolts
• rear frame 6mm thick
• wide box belt
• big front protection frame
• galvanised sprung drawbar
• hydraulic jack
• bolted ring hitch
• folding ladder
• flashing beacon
• truck lights
SPREADING:
• floor speed regulator on cable frame
• marine bed chains
• left & right front rolls scrapper
• manual chain tension
• drive shaft 55mm diameter, fully protected
• overrunning clutch + cam clutch
• wide angle PTO shaft
• oversized gearbox
| Heaped volume | M2070 : 20m3 (real capacity) |
| M2470 : 24m3 (real capacity) | |
| Axle(s) / Studs | M2070: Lowered fixed tandem + steering Axle 130mm / 10 |
| M2470: Lowered fixed tandem + steering Axle 150mm / 10 (Delta in option) | |
| Hydraulic brakes | M2070: 406x120 |
| M2470: 420x180 | |
| Bed-Top beater height | 1 890 mm |
| Reducer | 10000 N.m |
| Hydraulic motor | 160 cm3/tr |
| Marine bed chains | Ø16 mm x 56 mm |
| Distance betwenn floor slats | 336 mm |
| Floor slats U 70 mm | 45 |
| Beaters | Ø1035 mm |
| Rotors thickness | 12 mm |
| Reversible knives | 52 |
| Spreading speed | 422 RPM at 1000 RPM |
| Minimum tractor power | 248 HP at 1000 RPM |
DRAWBARS - HITCHES - JACKS
• Ø80mm bolted ball hitch instead of ring hitch
• Hydraulic jack instead of manual jack
• Drawbar foot instead of manual jack
• Hydraulic suspension on drawbar
SHAFT
• Extra for wide angle PTO shaft 21 splines
MUDGUARDS - LIGHTS
• Mudguards with 1 pair of side lights LED included
• Rear mudflaps
• Extra for LED road lights
• Extra side lights
• LED truck lights
• Translucent flap on top front (for liquid manure)
• Wheel chock (brackets included)
RUNNING GEARS
• Air brakes
• Air and hydraulic brakes
• DELTA Active hydraulic suspension 2 modules
EXTENSIONS
• Wooden extensions (M2070 series)
SILAGE KIT
- 35m3 to top-full
- 40m3 with a 0.5 m dome
FLOOR CHAINS
• Removable floor slats
• Floor with PICHON flat chains
• Floor with Vaucanson Ø20mm chains
• Extra for 200cc motor to drive the floor
• Extra for 300cc motor to drive the floor
• Hydraulic chain tension (hydraulic jack obligatory)
• Chain protection (for lime product and heavy manure)
SPREADING TOOLS
• Hydraulic guillotine door
• Right side hydraulic deflector
• Left side hydraulic deflector
• Rear hood with spinning discs
• Mechanical guillotine door level indicator
• Hydraulic guillotine door level indicator
• Right bottom deflector on rear hood
• Left bottom deflector on rear hood
• Curved blades on first bottom screw
• Curved blades on the entire screw
• Beaters with Ø323mm tube and 62 blades
IN-CAB CONTROLS
• In-cab electric floor control
• Hydraulic distribution
• Opening guillotine door security
• Load counter
HYDRAULIC UNIT
• Hydraulic drive unit (oil quantity delivered 80L - 1000 RPM PTO) with hydraulic distribution only
ELECTRONNIC FLOWMETER CONTROL
• Flowmeter (requires a hydraulic distribution)
• Flowmeter + Weighing system
• ISOBUS extra for Flowmeter
• ISOBUS screen for tractor
• Load Sensing (Power Beyond) for oil on demand
ACCESSORIES
• Polyurethane storage box 440x400x480mm with handle
• 25L hand washing water tank (please specify position on spreader)
• Notebook tube
• Toolbox