Manure Spreaders Muck Master M1655 / M1855 Series

The manure spreaders Muck Master M1655 series (formerly M16) and M1855 (formerly M18) are available in three versions. They are equipped by a commercial axle 150mm (brakes 420 x 180), a bogie fixed with steering Axle 130mm (brakes 406 x 120) or a lowered fixed tandem with steering axle 130mm (brakes 406 x 120). Depending on the product, the spreading width can be between 8 to over 15 meters.
The M1655 Muck Master, with an accurate heaped capacity of 16m3, can be transformed to a M1855 by adding side extensions for a longer lifespan and thus increasing the volume capacity to 18m3.
These muck spreaders are equipped with a fully galvanised straight body which can be dismantled. In order to get a quality spreading pattern, PICHON chose to put together two vertical beaters with oversized diameter (1035mm) and 52 reversible blades which are driven by a single “monobloc” gearbox.
The specific position of the beaters frame prevents the product to be spread from being pushed back inside the body thereby reducing power required on PTO. This unique PICHON design is clearly a genuine innovation. By combining this design with the oversized beaters, PICHON enables its users to spread all kind of products with accurate spread pattern and high volume outputs.
Standard features on these spreaders are: front protection with inside view, galvanised sprung drawbar and adjustable hydraulic jack.
The floor made of 70mm U-shaped slats can be fitted with Marine chains 16mm diameter, with PICHON flat chains or Vaucanson chains 20mm diameter. The floor is driven by an oversized gearbox with a 10.000Nm torque and controlled by an in-cab electric box.
Many options are available in order to meet the specific needs of each user. Please refer to the section “Possible equipments” to get the full list of options and you can also find more pictures in the page “options ”.
In pictures
Product details
• 5 years warranty: body/frame and chassis (Europe market)
• Accurate capacity of the range of solid spreaders
• Galvanisation on all the series
STRUCTURE:
• fully galvanised
• axle recessed in the chassis
• chassis 6mm thick
• removable body sides 4mm thick
• front frame 4 and 6mm thick
• stainless steel bolts
• rear frame 6mm thick
• wide box belt
• big front protection frame
• galvanised sprung drawbar
• hydraulic jack
• bolted ring hitch
• folding ladder
• flashing beacon
• truck lights
SPREADING:
• floor speed regulator on cable frame
• marine bed chains
• left & right front rolls scrapper
• manual chain tension
• drive shaft 55mm diameter, fully protected
• overrunning clutch + cam clutch
• wide angle PTO shaft
• oversized gearbox
Heaped volume | M1655: 16m3 (real capacity) |
M1855: 18m3 (real capacity) | |
Axle(s) / Studs | M1655: Commercial axle 150mm / 10 |
M1655T: Bogie fixe + steering Axle 130mm / 10 | |
M1655T: Lowered fixed tandem + steering Axle 130mm / 10 | |
M1855: Commercial axle 150mm / 10 | |
M1855T: Bogie fixe + steering Axle 130mm / 10 | |
M1855T: Lowered fixed tandem + steering Axle 130mm / 10 | |
Hydraulic brakes | M1655: 420x180 |
M1655B: 406x120 | |
M1655T: 406x120 | |
M1855: 420x180 | |
M1855B: 406x120 | |
M1855T: 406x120 | |
Bed-Top beater height | 1890 mm |
Reducer | 10000 N.m |
Hydraulic motor | 160 cm3/tr |
Marine bed chains | Ø16 mm x 56 mm |
Distance betwenn floor slats | 336 mm |
Floor slats U 70 mm | 37 |
Beaters | Ø1035 mm |
Rotors thickness | 12 mm |
Reversible knives | 52 |
Spreading speed | 422 RPM at 1000 RPM |
Minimum tractor power | 248 HP at 1000 RPM |
DRAWBARS - HITCHES - JACKS
• Ø80mm bolted ball hitch instead of ring hitch
• Hydraulic jack instead of manual jack
• Drawbar foot instead of manual jack
• Hydraulic suspension on drawbar
SHAFT
• Extra for wide angle PTO shaft 21 splines
MUDGUARDS - LIGHTS
• Mudguards with 1 pair of side lights LED included
• Rear mudflaps
• Extra for LED road lights
• Extra side lights
• LED truck lights
• Translucent flap on top front (for liquid manure)
• Wheel chock (brackets included)
RUNNING GEARS
• Air brakes
• Air and hydraulic brakes
EXTENSIONS
• Wooden extensions (M1655 series)
SILAGE KIT
- 28m3 to top-full
- 32m3 with a 0.5 m dome
FLOOR CHAINS
• Removable floor slats
• Floor with PICHON flat chains
• Floor with Vaucanson Ø20mm chains
• Extra for 200cc motor to drive the floor
• Extra for 300cc motor to drive the floor
• Hydraulic chain tension (hydraulic jack obligatory)
• Chain protection (for lime product and heavy manure)
SPREADING TOOLS
• Hydraulic guillotine door
• Right side hydraulic deflector
• Left side hydraulic deflector
• Rear hood with spinning discs
• Mechanical guillotine door level indicator
• Hydraulic guillotine door level indicator
• Right bottom deflector on rear hood
• Left bottom deflector on rear hood
• Curved blades on first bottom screw
• Curved blades on the entire screw
• Beaters with Ø323mm tube and 62 blades
IN-CAB CONTROLS
• In-cab electric floor control
• Hydraulic distribution
• Opening guillotine door security
• Load counter
HYDRAULIC UNIT
• Hydraulic drive unit (oil quantity delivered 80L - 1000 RPM PTO) with hydraulic distribution only
ELECTRONNIC FLOWMETER CONTROL
• Flowmeter (requires a hydraulic distribution)
• Flowmeter + Weighing system
• ISOBUS extra for Flowmeter
• ISOBUS screen for tractor
• Load Sensing (Power Beyond) for oil on demand
ACCESSORIES
• Polyurethane storage box 440x400x480mm with handle
• 25L hand washing water tank (please specify position on spreader)
• Notebook tube
• Toolbox