Manure Spreaders Muck Master M1350 / M1450 Series

The Muck Master M1350 (ex M12) and M1450 (ex M14), with their fully galvanised body, are equipped with 150mm square beam axles, hydraulic brakes 420x180mm and 2 vertical beaters of 1035mm diameter with 46 reversible blades.
The M1350, with an accurate heaped capacity of 13m3, can be transformed to a M1450 by adding side extensions and a large front protection cover (both fully galvanized) for a longer lifespan and thus increase the carrying capacity to 14m3.
These models are built with the same technical characteristics of the higher capacity PICHON spreaders. These machines are designed for farmers and contractor wishing to get a robust machine with an accurate spread pattern.
The specific position of the beaters frame prevents the product to be spread from being pushed back inside the body thereby reducing power required on PTO. These spreaders are equipped with a sprung drawbar and a manual jack but a drawbar with passive hydraulic suspension and a hydraulic jack can be added on the machine for more comfort.
This unique PICHON design is a genuine innovation. By combining this design and the oversized diameter of beaters, PICHON enables its users to spread all kind of products with accurate spread pattern and high volume outputs.
Many options are available in order to meet the specific needs of each user. Please refer to the section “Possible equipments” to get the full list of options and you can also find more pictures in the page “options ”.
In pictures
Product details
• 5 years warranty: body/frame and chassis (Europe market)
• Accurate capacity of the range of solid spreaders
• Galvanisation on all the series
STRUCTURE:
• fully galvanised
• axle recessed in the chassis
• chassis 6mm thick
• removable body sides 4mm thick
• front frame 4 and 6mm thick
• stainless steel bolts
• rear frame 6mm thick
• wide box belt
• big protection cap (M1450 serie)
• galvanised sprung drawbar
• manual jack
• bolted ring hitch
• folding ladder
• flashing beacon
• truck lights
SPREADING:
• floor speed regulator on cable frame
• marine bed chains
• left & right front rolls scrapper
• manual chain tension
• drive shaft 55mm diameter, fully protected
• overrunning clutch + cam clutch
• wide angle PTO shaft
• oversized gearbox
Heaped volume | M1350: 13m3 | M1450: 14m3 (real capacity) |
Axle(s) / Studs | Commercial Axle 150 mm / 10 studs |
Hydraulic brakes size (mm) | 420 x 180 |
Bed-Top beater height | 1678 mm |
Reducer | 5000 N.m |
Hydraulic motor | 125 cm3/tr |
Marine bed chains | Ø16 mm x 56 mm |
Distance betwenn floor slats | 336 mm |
Floor slats U 70 mm | 34 |
Beaters | Ø1035 mm |
Rotors thickness | 10 mm |
Reversible knives | 46 |
Spreading speed | 422 RPM at 1000 RPM |
Minimum tractor power | 200 HP at 1000 RPM |
DRAWBARS - HITCHES - JACKS
• Ø80mm bolted ball hitch instead of ring hitch
• Hydraulic jack instead of manual jack
• Drawbar foot instead of manual jack
SHAFT
• Extra for wide angle PTO shaft 21 splines
MUDGUARDS - LIGHTS
• Mudguards with 1 pair of side lights LED included
• Rear mudflaps
• Extra for LED road lights
• Extra side lights
• LED truck lights
• Translucent flap on top front (for liquid manure)
• Wheel chock (brackets included)
RUNNING GEARS
• Air brakes
• Air and hydraulic brakes
EXTENSIONS
• Wooden extensions (M1350 series)
FLOOR CHAINS
• Removable floor slats
• Floor with PICHON flat chains
• Floor with Vaucanson Ø20mm chains
SPREADING TOOLS
• Hydraulic guillotine door
• Right side hydraulic deflector
• Left side hydraulic deflector
• Rear hood with spinning discs
• Mechanical guillotine door level indicator
• Hydraulic guillotine door level indicator
• Right bottom deflector on rear hood
• Left bottom deflector on rear hood
• Curved blades on first bottom screw
• Curved blades on the entire screw
IN-CAB CONTROLS
• In-cab electric floor control
• Hydraulic distribution
• Opening guillotine door security
• Load counter
HYDRAULIC UNIT
• Hydraulic drive unit (oil quantity delivered 80L - 1000 RPM PTO) with hydraulic distribution only
ELECTRONNIC FLOWMETER CONTROL
• Flowmeter (requires a hydraulic distribution)
• Flowmeter + Weighing system
• ISOBUS extra for Flowmeter
• ISOBUS screen for tractor
• Load Sensing (Power Beyond) for oil on demand
ACCESSORIES
• Polyurethane storage box 440x400x480mm with handle
• 25L hand washing water tank (please specify position on spreader)
• Notebook tube
• Toolbox